Publicidad
Step 24
Fasten the DOOR (K) to the LEFT CPU END (D). Use four
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten a KNOB (116K) and BACKPLATE (120K) to the DOOR (K).
å
Use a BLACK 1-1/8" MACHINE SCREW (21S).
Peel the FELT DISC from the FELT DISC CARD (1M).
å
Stick a FELT DISC on the DOOR where it comes in
contact with the RIGHT CPU END (C).
NOTE: To make adjustments to the DOORS, loosen the
å
SCREWS in the HINGES, make needed adjustments, and
tighten the SCREWS.
+
116K
120K
BLACK 1-1/8" MACHINE SCREW
(1 used for the BACKPLATE and PULL)
www.sauder.com/services
1M
K
1M
21S
D
C
418648
BLACK 9/16" LARGE HEAD SCREW
(4 used for the HINGES)
1S
Page 29
Publicidad
