Publicidad
Step 34
To insert the large drawer into your unit, line up the
å
EXTENSION SLIDES on the drawer with the EXTENSION
RAILS on the unit and push the drawer into the unit until
the drawer is fully inserted. The drawer will push in hard
until it is all the way in, then it will slide in and out easier.
To insert the small drawers into your unit, tip the front
å
of the drawer down and drop the rollers on the drawer
behind the rollers on the unit. Lift the front of the drawer
up and slide it into the unit. Repeat this step to insert the
KEYBOARD SHELF (P).
Push the RUBBER SLEEVES (2R) over the METAL
å
PINS (1R). Insert the METAL PINS into the hole locations
of your choice in the CPU ENDS (C and D). Set the
ADJUSTABLE SHELF (L) onto the METAL PINS.
1R
(4 used)
www.sauder.com/services
L
15 lbs.
2R
7 lbs. each
20 lbs.
50 lbs.
25 lbs.
D
P
C
20 lbs.
50 lbs.
418648
Page 39
Publicidad
