Noise Information; Vibration Information - AEG SB2E 850 RZ Manual Original

TECHNICAL DATA
Percussion Drill
Rated input
Output
No-load speed 1st gear
No-load speed 2nd gear
Speed under load 1st gear
Speed under load 2nd gear
Rate of percussion under load max.
Impact rate max.
Static jamming moment*
Drilling capacity in concrete
Drilling capacity in brick and tile
Drilling capacity in steel
Drilling capacity in wood
Drill chuck range
Drive shank
Chuck neck diameter
Weight according EPTA-Procedure 01/2003

Noise information

Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 60745
Drilling into metal
Vibration emission value a
h,D
Uncertainty K=
Impact drilling into concrete
Vibration emission value a
h, ID
Uncertainty K=
Screw driving without impact: Vibration emission value a
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the accesso-
ries, keep the hands warm, organisation of work patterns.
h
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
DRILL SAFETY WARNINGS
Wear ear protectors when impact drilling. Exposure to noise
can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a „live" wire may make exposed metal parts of the power
tool „live" and could give the operator an electric shock.
SB2E 850 RZ SB2E 1100 RVZ
850 W 1100 W
460 W 600 W
0-1000 min 0-1000 min
-1
0-3000 min 0-3000 min
-1
0-680 min 0-680 min
-1 -1
0-2000 min 0-2000 min
-1
38000 min 38000 min
-1
57000 min 57000 min
-1
56/30 Nm 60/33 Nm
20 mm 22 mm
22 mm 24 mm
13 mm 16 mm
40 mm 40 mm
1,5-13 mm 3 - 16 mm
1/2" - 20 UNF 1/2" - 20 UNF
43 mm 43 mm
2,7 kg 3,1 kg
100,0 dB (A) 94,0 dB (A)
111 dB (A) 105 dB (A)
2,7 m/s 3,5 m/s
2 2
1,5 m/s 1,5 m/s
2 2
13,4 m/s 12,2 m/s
2 2
1,5 m/s 1,5 m/s
2 2
1,1 m/s 1,8 m/s
2 2
1,5 m/s 1,5 m/s
2 2
English
English
-1
-1
-1
-1
-1
GB
15