Bissell BarkBath QT 2290 Serie Manual De Instrucciones página 10

Bathing Your Dog (continued)
5
Set the Rinse/Shampoo switch to the
desired setting. For Shampoo, the reservoir
will dispense a mixture of shampoo and
water; for Rinse, it will dispense just water.
NOTE: The Dog Bathing Tool is always extracting dirty water. The trigger
dispenses the shampoo and/or water. While pressing the trigger, it also continues
extracting dirty water.
7
Place the tool on the dog
so the nozzles are flush
on the dog's body before
pressing and holding the
spray trigger to release
the shampoo/water under
the dog's coat.
10
Spray shampoo/water on the microfiber
towel and hand clean delicate areas such
as the dog's face and paws.
10
www.BISSELL.com
6
Test the system by pointing the nozzle
at the microfiber mat and pressing and
holding the spray trigger until solution
dispenses.
8
With the tool firmly against
the dog's body, press and
hold the spray trigger
while using the nozzles
to brush the bathing tool
downwards, following the
fall of the dog's coat.
11
9
Release the spray trigger
and use "drying strokes"
to suction up moisture
from the dog's coat.
Repeat as needed.
As a final step, coat should be air-
or towel-dried as needed.