Bissell BarkBath QT 2290 Serie Manual De Instrucciones página 7

Baño portátil para perros
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparing Your Cleaner
WARNING
To avoid damaging your unit and to reduce the risk of injury to your pet, do not boil or
microwave water. Use only warm tap water.
1
NOTE: There may be condensation in the clean water tank due to quality testing
before shipment.
3
5
7
Remove the clean
water tank by
lifting it straight
up and then away
from the unit.
To ensure your pet
has a nice bathing
experience, use warm-
to-the-touch tap
water to the fill line on
your clean water tank.
Replace and securely
tighten the cap to the
machine.
Before connecting
the bathing tool, you
will need to prime the
system. Place the unit
on a high, flat surface
(such as a table or
counter top).
Hold the flex
hose end over the
microfiber mat or
towel and press
the trigger at the
end of the flex
hose until water
dispenses.
2
4
6
8
Flip the tank so the
black cap is on top
and unscrew. Pull
up to remove cap
assembly from tank.
Replace the clean
water tank by lining
up the grooves on
the clean water
tank with the
vertical guides
on the side of the
unit. Gently slide it
down into position.
Plug the unit in
and press the
power switch to
ON ( I ) position.
Turn the unit OFF,
pressing the power
switch to ( O )
OFF position.
www.BISSELL.com
7

Publicidad

Tabla de contenido
loading

Tabla de contenido