Bissell BarkBath QT 2290 Serie Manual De Instrucciones página 12

Cleaning Your BarkBath™ After Use
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
1
Turn power switch to the OFF (O) position
and unplug power cord from outlet.
3
Press release button and
disconnect flex hose from
the dog bathing tool by
pulling straight out. (DO
NOT twist tool to remove.)
6
Check spray nozzle for
accumulated dirt or
debris. If necessary, clean
with soft bristle brush.
12
www.BISSELL.com
2
4
Once removed from flex
hose, keep tool elevated
to avoid dripping water on
floor and rinse clean under
running water.
7
You may disassemble the
spray nozzle for cleaning
as needed. Removing the
faceplates will expose
longer spray nozzles.
Remove and
rinse out the
dirty water
tank following
instructions in the
"Emptying the
Dirty Water Tank"
section.
5
Flip tool to release water
into sink. While holding the
tool in the air and reservoir
in the sink, press the trigger
to assure all water empties
from the hose.
8
Be sure all pieces are
completely dry before
returning to base unit
and before storage.