Bissell BarkBath QT 2290 Serie Manual De Instrucciones página 8

Attaching the Bathing Tool
NOTICE: Dish soap, traditional dog or human shampoos and/or conditioners
should not be used as they may be too thick and may damage the machine.
Use only BISSELL® No-Rinse Dog Shampoo in your Portable Dog Bath System.
Use of shampoos or soaps which contain lemon or pine oil may damage this
appliance and may void the warranty. These products may react with the plastic
materials used in your cleaner, causing cracking or pitting.
1
TIP: Since every dog is unique, first start by adding a small amount of BISSELL®
No-Rinse Dog Shampoo to reservoir. Continue to add more shampoo as needed
to effectively clean your dog.
3
5
Holding the tool horizontally on a flat
surface (such as a table or counter top),
attach the bathing tool to the cleaner by
inserting the flex hose connector into the
shampoo tool connector. You will hear a
"click" when it locks into place.
8
www.BISSELL.com
Locate the bathing tool
and BISSELL® No-Rinse
Dog Shampoo.
Holding the tool right
side up, add BISSELL®
No-Rinse Dog Shampoo
to the shampoo reservoir.
2
4
6
Prime the tool by pointing the nozzle
at the microfiber mat and pressing and
holding the spray trigger until solution
dispenses.
Unscrew the cap
to the shampoo
reservoir to
unattach it from
the bathing tool.
Align the
screw cap with
the tabs of
the reservoir
opening and
twist shut.