Domo DO7295S Manual De Instrucciones página 31

TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. For this, push the slide on the wand downwards and
pull on the upper part of the wand to extend it. Release the slide button and let the tube snap into
place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
ACCESSORIES
1. Crevice nozzle: for hard to reach areas like radiators, crevices, corners, in
between pillows,...
2. Furniture nozzle: for easy, quick and thorough cleaning of upholstered
furniture
USE
1. Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2. To turn the vacuum cleaner on and off, press the foot pedal with the
3. The suction can be controlled using the valve on the handle of the hose. The vacuum has a suction
power of 17 kPa, which means that the appliance has very strong suction power. This could cause the
end of the floor nozzle to become attached to the floor. If you want to reduce the suction force, you
can slide open the valve on the handle of the hose.
Slide the switch on the floor nozzle to 'deep clean' to effectively remove deeply-ingrained dust from
all types of floor.
· Carpets: ensure that the switch on the floor nozzle is set to
· Hard floors: ensure that the switch on the floor nozzle is set to
4. When you have finished vacuuming, now switch off the vacuum cleaner, unplug the vacuum cleaner
and automatically rewind the cord by pressing the foot pedal with the
the plug does not whip back and forth while rewinding the cord, by guiding the cord with your hand.
This to prevent possible damage.
2
www.domo-elektro.be
symbol.
(A).
4
A
1
2
(B).
symbol. Make sure that
B
DO7295S
31