Back View - Dynabook PA5356E-1PRP Manual Del Usuario

Back view

The following illustration shows the back of the dock. For a description of
each component, refer to the accompanying table.
1. Universal Serial Bus (USB 3.1 Gen1)
ports
2. LAN jack
3. VGA monitor port
4. DisplayPort™
Component
Universal Serial Bus
(USB 3.1 Gen1)
ports
LAN jack
(10/100/1000 BASE-
TX Ethernet)
VGA monitor port
DisplayPort™
HDMI™ out port
User's Manual
1 2
(Sample Illustration) The back of the dock
Two Universal Serial Bus ports, which comply to
the USB 3.1 Gen1 standard, are provided on the
back panel of the dock.
The USB 3.1 ports are compliant with USB 3.1
standard and backward compatible with USB 2.0
devices.
This jack lets you connect to a LAN via a network
cable (not provided). Plug one end of a network
cable into the LAN jack on the dock and the other
end into a LAN hub connector or router.
Check with your LAN administrator and hardware
or software vendor before using or configuring a
network connection.
This port provides 15-pin analog VGA port. It
allows you to connect an external VGA monitor to
the dock.
This port is for a connection to a DisplayPort™
device.
HDMI™ out port can connect with Type A
connector HDMI™ cable (supports video and up to
5.1 surround sound).
3
4
5. HDMI™ out port
6. USB Type-C™ port (connecting to the
computer)
7. DC IN 20V jack
Description
dynabook USB-C™ Dock
6
5
7
EN-15