Configuring Audio Recording Ports (Microphone); Configuring Video Ports; Connection - Dynabook PA5356E-1PRP Manual Del Usuario

4. Click Set Default.
5. Click OK.
6. Connect your playback device to the port you enabled in step 3.

Configuring audio recording ports (Microphone)

1. Right-click the Speakers icon in Windows taskbar.
2. Select Sounds from the menu.
3. On the Recording tab of the dialog box, select one of the following:
■
■
4. Click Set Default.
5. Click OK.
6. Connect your recording device to the port you enabled in step 3.

Configuring Video Ports

Connection

The dock provides the following video ports:
HDMI™ - for connection to HDMI™ (using the HDMI™ cable which is
not provided) interface monitors.
DisplayPort™ - for connection to DisplayPort™ (using the
DisplayPort™ cable which is not provided) interface monitors.
VGA monitor port - for connection to VGA (using the VGA cable which
is not provided) interface monitors.
Upon connection, the video output ports on the dock become enabled
■
NOTE
and the video output ports on the computer become disabled. When
you disconnect the dock from the computer, the video output ports on
the computer are re-enabled automatically.
Connect the monitor cable (not provided) to the video output port on the
dock and the external monitor. This cable can be connected and
disconnected any time without disconnecting the dock from your computer.
You can customize the video settings of the dock. See
Settings
User's Manual
Microphone Array - to use the audio device of the computer
dynabook USB-C™ Dock Audio - to use the Headphone/
Microphone combo jack of the dock
section for more information.
dynabook USB-C™ Dock
Adjusting Video
EN-19