Before You Start; Safety Instructions - Kingfisher 3663602820710 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22

Before you start

01

Safety instructions

• Don't use this thermometer to test object above 250°C.
• After test, please clean the probe with warm water or neutral detergent, and then insert the probe into the protection cover.
• If there seems to be something wrong with the thermometer
• When reading begins to be fuzzy, the battery is low and should be replaced immediately.
• Don't litter the waste battery for environmental protection.
• Keep the thermometer out of reach of infant or child.
02
To install batteries
1. This instrument requires 1 x 1.5V LR44H battery .
2. Remove the battery compartment cover.
3. Insert the batteries paying attention to the polarity (+/-) marked on the compartment and batteries.
4. Close the battery compartment cover.
KNG2109200_ONLINE.indd 4
Use
Utilisation
Utilizare
Uso
CAUTION:
• ALWAYS turn off the instrument before replacing the batteries.
• ALWAYS remove the batteries if the instrument is not to be used for
extended periods.
• ALWAYS use high quality batteries of the same brand, type and age.
• If the instrument does not work properly, or the low battery icon is displayed,
replace the batteries immediately.
• DO NOT expose the batteries or instrument to extreme temperatures or direct
heat source, as this can cause the batteries to leak.
• If the batteries should leak, remove them using a cloth and dispose of them
according to local regulations. Clean any leaked battery acid avoiding any contact
with skin, eyes & mouth.
• If any contact does occur, rinse affected areas immediately with fresh water and
seek medical advice.
Benutzung
Utilização
4
23/06/2021 13:18

Publicidad

Tabla de contenido
loading

Tabla de contenido