Functions And Settings; Technical Data - Kingfisher 3663602820710 Manual Del Usuario

Functions and settings

MAX Maximum reading is being displayed.
MIN Minimum reading is being displayed.
HOLD Data Hold is enabled.
— Negative sign.
°C Celsius degree.
°F Fahrenheit degree.
01 Operating instructions
1. Press the "ON/OFF" button to turn on the thermometer, the display shows all it symbols instantaneously, then the display reads
zero and then shows the current temperature (sensed by the tip of the thermometer's probe) .
2. Press the "'C/'F"button to switch the thermometer between Celsius mode and Fahrenheit mode.
3. Press the "HOLD" button to hold the current reading on the display
on the display . Press the "HOLD" button once more to show the minimum reading of all readings since the thermometer is
4. You can continue to press the "HOLD" button to repeat the above procedure.
5. To turn off the thermometer, just press the "ON/OFF" button again.
Automatic Power-Off: If you do not press any button for about 20 minutes, the thermometer will turn off automatically.
Over range indication: If the measured temperature is higher than 250°C, the display will show "H--". If the measured temperature
is lower than -40°C, the display will show "L--".

Technical data

Celsius Temperature
Fahrenheit Temperature
Operating Temperature
E.G.
Celsius
Fahrenheit
KNG2109200_ONLINE.indd 5
-40°C ~ +250°C
-40°F ~ +482°F
0°C (32°F) ~ +50°C (122°F)
@100°C = ±((0.02*100) + (20*0.1)) = ±4°C
Range
40°C ~ 0°C
+0.1°C ~ +99.9°C
+100°C ~ +199.9°C
+200°C ~ +250°C
-40°F ~ +32°F
+32.1°F ~ +199.9°F
+200°F ~ +482°F
Accuracy
±(2%+20R)
±(2%+10R)
±(2%+20R)
±(3%+2R)
±(2%+20R)
±(2%+10R)
±(3%+2R)
5
Resolution
0.1°C
0.1°C
0.1°C
1°C
0.1°F
0.1°F
1°F
V20920
23/06/2021 13:18