MOB MO9662 Manual Del Usuario página 2

MO9662
EN
Power bank with wireless charger
Instructions:
1. Charging electronic digital equipment:
Please use the original cable of your electronic digital products for
connection. The power bank will automatically charge up your
electronic digital products once they are connected to each other.
(Please make sure the power bank is charged for best performance.)
Unplug the charging cable after the digital product is fully charged.
Caution: The output power of the power bank is 5V/2A, please
check input specification of your product before charging with the
power bank.
2. Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB
cable to the power bank for recharge. The white indicator light will
flash when charging in progress. The indicator lights are
permanently lit when the power bank is fully charged.
3. Wireless charging:
Make sure the mobile phone is at the center of the wireless charging
pad. The blue indicator lights up to indicate that the wireless charger
is working.
Product specifications:
Input:
Output:
Wireless output
Capacity:
Charging efficiency: 75%
Attention:
-
Please keep the charger away from water or other liquids.
If you need to clean the charger, please make sure it is not
connected to a power supply. Safe working temperature 0-
45℃.
DC 5V/2A
DC 5V/2A
DC 5V/1A
6000mAh