Settings - auna Connect Soundchef MKII Manual

SETTINGS

Setting an alarm
1. Press and hold the MENU button on main unit or remote control and
turn and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to select 'Alarms'.
3. Turn and press the NAVIGATE dial to select 'Alarm 1' or 'Alarm 2'.
4. Turn the NAVIGATE dial to scroll through each alarm setting. If you want
to change a setting, press the NAVIGATE dial. You can set the following
alarm options:
Enable Turn and press the NAVIGATE dial to choose when
you want the alarm to repeat. The available options
are 'Off ','Daily', 'Once', 'Weekends' or 'Weekdays'.
Time Turn and press the NAVIGATE dial to adjust the
hour of the alarm. Note: If you have set to use the
12 hour time format, make sure that you select the
'AM' or 'PM' version of the hour before pressing the
NAVIGATE dial. Repeat to set the minutes of the
alarm.
Mode Turn and press the NAVIGATE dial to choose between
'Buzz', 'Internet radio', 'DAB', 'FM'.
Volume Turn and press the NAVIGATE dial to set the volume
when the alarm sounds.
Save Turn and press the NAVIGATE dial to save the alarm.
Sleep setting
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. Press the MENU button.
2. Turn and press the NAVIGATE dial or use the < OK > buttons on the
remote control to choose 'Main menu' and then choose 'Sleep'.
3. Turn the NAVIGATE dial or use the < OK > buttons on the remote control
to increase the duration of the sleep timer from 15 to 60 minutes. Press
the NAVIGATE dial or the OK button on the remote control to start the
sleep timer.
EN
55