Chacon 34036 Manual De Uso página 47

2. Link the detector with a central unit
1. Using a screwdriver, open the battery compart-
ment of the main unit.
2. Press and hold the learn button until you hear a
«beep». The unit enters pairing mode.
3. Separate the two parts of the opening detector
to send a signal to the main unit. You will hear a
«beep» sound to indicate that the pairing was
successful.
4. To exit pairing mode, press and hold the learn
button for 3 seconds. You will then hear a double
«beep».
NOTE: A maximum of 32 transmitters can be paired
to a main unit.
EN