Use; Precautions For Use; First Use - Metrix MX 350 Manual De Instrucciones

Precautions for use

The operator and/or

the responsible authority
must carefully read and
clearly understand the
various precautions to be
taken in use.
If you use this

instrument other than as
specified, the protection it
provides may be
compromised, thereby
endangering you.
Do not use the

instrument if it seems to be
damaged, incomplete, or
poorly closed.
Before each use,

check the condition of the
insulation on the leads,
housing, and accessories.
Any item of which the
insulation is deteriorated
(even partially) must be set
aside for repair or
scrapping.
The safety of any

system in which this
device is incorporated is
the responsibility of the
system integrator.

First use

Place the batteries in the device as follows:
1.
2.
3.

3. USE

Use a screwdriver; unscrew all the battery
cover screws on the back of the meter.
Place the batteries in the casing, respect
polarity.
Screw back battery cover screws
Before using your

device, check that it is
perfectly dry. If it is wet, it
must be thoroughly dried
before being connected or
being operated in any way.
Use only the leads

and accessories supplied.
Using leads (or
accessories) of a lower
voltage or category
reduces the voltage or
category of the combined
instrument + leads (or
accessories) to that of the
leads (or accessories).
Use personal

protection equipment
systematically.
When handling the

leads, test probes, and
crocodile clips, keep your
fingers behind the physical
guard.
Comply with the

environmental conditions
of use.
Do not use the clamp

above its rated frequency,
since this might cause it to
overheat dangerously.
20