Precautions For Use - Metrix HX0102 Manual De Instrucciones

Thank you for purchasing a HX0102 or HX0102-K oscilloscope current probe.
To obtain the best service from your unit:
„ read these operating instructions carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator agrees to refer to these instructions whenever this
danger symbol appears.
Double insulation.
Application or withdrawal authorized on conductors containing dangerous voltages. Type A
current sensor as per IEC 61010-2-032.
I
The arrow indicates the direction of the current.
Battery.
The CE marking guarantees conformity with European directives and with EMC regulations.
The rubbish bin with a line through it means that in the European Union, the product must
undergo selective disposal for the recycling of electric and electronic material, in compliance
with Directive WEEE 2002/96/EC.
Definition of measurement categories:
„ Measurement category IV corresponds to measurements taken at the source of low-voltage installations.
„ Measurement category III corresponds to measurements on building installations.
„ Measurement category II corresponds to measurements taken on circuits directly connected to low-
voltage installations.
„ Measurement category I corresponds to measurements taken on circuits not directly connected to
the network.
The protection provided by the instrument may be impaired if the instrument is used other than as
specified by the manufacturer.
„ Do not exceed the rated maximum voltage and current or the measurement category. Do not use your
instrument on networks of which the voltage or category exceeds those stated.
„ Observe the conditions of use, namely the temperature, the relative humidity, the altitude, the level of
pollution, and the place.
24

PRECAUTIONS FOR USE

Chapter II
Oscilloscope current probe