BGS technic 6745 Manual De Instrucciones página 6

SAFETY NOTES
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
• Make sure that the work area is sufficiently illuminated.
Keep the work area clean, organised, dry and free from other materials.
•
Keep this tool out of reach of children.
•
OCCUPATIONAL SAFETY
When using the tool, always use / wear the following protective equipment:
• Safety glasses
Ear defenders
•
Anti-slip safety shoes
•
Work gloves
•
UNPACKING
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
TRAILING ARM / TRAILING ARM BUSHING
A Trailing arm
B Trailing arm bushing
C
Handbrake cable mount
NOTE
The following illustrations in the chapter Disassembly and Assembly show a section of the right
trailing arm when disassembled. More precise information and instructions can be found in the
vehicle-specific service literature.
A
Trailing arm
C Handbrake cable mount
D
Hole in the trailing arm
E
Marking of the mounting position
DISASSEMBLY COMPONENTS REQUIRED
The following tool components are required for disassembly of the trailing arm bushing.
Complete frame with components (1-6)
Adapter (7) without depth stop and nuts (8)
C-ring (9)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Fig. 1
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
L Marking for left side
R Marking for right side
F
Guide pins
Fig. 3
Fig. 2
Fig. 4
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed