Video Input Source Selection - Christie LWU505 Manual Del Usuario

Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired input
2
and then press the Point ► button to access the
submenu items.
Use the Point ▲▼ buttons to select the desired
3
source and then press the SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
RGB(Scart)
When scart video equipment is connected to the
INPUT 1 (ANALOG) terminal, select RGB (Scart).
HDMI
When the video signal is connected to the HDMI
terminal, select HDMI.
RGB(AV HDCP)
If the HDCP-compatible signal source is
connected to the INPUT 1 (DIGITAL) terminal,
select RGB (AV HDCP).
WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS )
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
When the video input signal is connected
Video
to the VIDEO jack, select Video.
When the video input signal is connected
y,Pb/Cb,Pr/Cr
to the Y-Pb/Cb-Pr/Cr jacks, select y,Pb/
Cb,Pr/Cr .
Note:
• When the video input signal is connected to
the Y-Pb/Cb-Pr/Cr jacks, Y,Pb/Cb,Pr/Cr takes
precedence of RGB.
• Y,Pb/Cb,Pr/Cr input can accept the component
signal and the analog RGB signal. When analog
RGB signal is not recognized in Y,Pb/Cb,Pr/Cr input
source, set to RGB input manually.
WHEN SELECTING INPUT 3 (AV TERMINALS )
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
When the video input signal is connected
Video
to the VIDEO jack, select Video.
When the video input signal is connected
y,Pb/Cb,Pr/Cr
to the Y-Pb/Cb-Pr/Cr jacks, select y,Pb/
Cb,Pr/Cr .
When the video input signal is connected
S-video
to the S-VIDEO jack, select S-video.
LWU505 User Manual
020-000374-0

Video Input Source Selection

Input Selection
INPUT 1 MENU
INPUT 2 MENU
INPUT 3 MENU
35