Adler europe AD 2114 Manual De Uso página 4

socket, because water proximity presents risk, even if the device is turned off.
15. Do not allow the device to wet. If the device falls into water, immediately remove the
power plug from the power socket. If the device is powered, do not put hands in the
water. Have the device checked by the qualified electrician before using it again.
16. Do not touch the device with wet hands.
17. The device has to be turned off after every use.
18. Do not leave device unattended when plugged in.
19. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
20. The power cord should not touch hot parts of the device and should not be located
near other heat sources.
21. Do not wrap electric cable around the device.
22. Do not use the appliance in the bath.
23. Do not remove dust or foreign bodies from the inside of the device using sharp
objects.
24. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
25. Do not cover the appliance, it might cause the accumulation of heat in its interior and
it may cause damage or fire.
26. Hairsprays contain flammable materials. Do not apply them while using the device.
27. Do not use the device on people who are sleeping.
28. During operation, do not put the device on a wet surface or on a surface that is
sensitive to heat and high temperatures.
29. After use, turn off and unplug the unit. Wait until the device cools down before storing.
30. The heating elements reach high temperatures during operation. Do not touch hot
parts of the device with bare hands and do not allow it to come into contact with the
scalp, as this may cause burns.
31. The device is not intended to be operated with external timers or a separate remote
control system
.
DESCRIPTION OF THE DEVICE
1. On/off power button
3. Display
5. Clamp
7. Stand
USING THE DEVICE
To achieve the best results in hair curling, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to use
the correct temperature setting for your hair type.
1. Before starting power cord should be fully unrolled.
2. Insert the plug into the power socket. LCD temperature display will turn on and show "OFF" sign.
3. Press the On/Off power button (1) until curling iron shows "180°C" and starts heating up to this value.
4. Adjust the temperature using temperature adjustment buttons +/- (2). During heat up time, the LCD temperature display (3) will start
flashing until the desired temperature is reached. Display will stop flashing when the curling iron is ready to use.
5. Start with separating a strand of hair.
6. Open the clamp (5) using the lever (6). Place the strand of hair so that the hair ends protrude slightly beyond the clamp. Close the
clamp (5).
2. Temperature adjustment +/- (100°C... 180°C... 210°C)
4. Ceramic coated barrel
6. Lever
8. Cool tip
4