Important - EDM Koma Pro 08337 Manual De Instrucciones

English
2.4. SAFETY IN THE USE OF FUELS
IMPORTANT: The fuel used for the chainsaw
is highly flammable. If the fuel or the
machine ignite, smother the fire with a dry powder fire
extinguisher. Always avoid eye contact with gasoline
or oil.
If gasoline or oil comes in contact with your eyes, rinse
immediately with clean water. If your eye still feels
irritated later on, immediately consult with a doctor.
Do not smoke while handling Fuel or fill deposits, nor
bring any flame or hot object toward the fuel.
When you are refilling the fuel, make sure
you have turned the machine off and make sure that the
engine is cold. Never refuel with the motor
running or hot. In the event of a fuel leak
be sure to remove these leaks completely
before restarting.
Do not refuel in enclosed spaces, in poorly ventilated
areas or near flames.
Always store fuel in approved containers that
comply with the European standard.
2.5. CARE AND USE OF THIS MACHINE
Use to cut wood only. Do not use the chainsaw for any
other purposes. For example: do not use chainsaw for
cutting plastic materials, bricks or non-wood building
materials. The use of the chainsaw for operations
other than those designed may result in dangerous
situations.
Carefully follow the operating instructions contained
in this manual. Failure to follow the instructions
contained in this manual may cause a dangerous
situation.
Use this machine, accessories, tools, etc. in
accordance with these instructions and as planned,
taking into account the work conditions and work yet to
develop. The use of this machine any other use apart
from the designed applications may cause a dangerous
situation.
The manufacturer shall not be responsible for damage
caused by improper or incorrect use of this machine.
Do not force this machine. Use this machine for the
correct application. Using the machine for the type of
work to be done will allow you to work better and more
safely.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that cannot
be controlled with the switch is dangerous and must
be repaired.
Keep proper maintenance of this machine. Check that
the moving parts are not misaligned or locked, broken
parts or other conditions that may affect the operation
of this machine.
If this machine is damaged, repair fully before use.
Many accidents are caused by poorly maintained
machines.
Keep cutting instruments clean and sharp. Maintaining
the cutting tools correctly with sharp cutting edges is
less likely to bind and is easier to control.
Keep the machine's handles dry and clean. Greasy or
oily handles are slippery and cause loss of control of
the machine.
Turn off the machine and disconnect the spark plug
before making any adjustments, changing accessories,
70/130