CAIRE VisionAire 5 Manual Del Usuario página 6

VisionAire 5
Unpacking Your VisionAire
Verify that all of the components listed are included
in the package. If any items are missing, contact
your oxygen provider immediately.
• Stationary Oxygen Concentrator
Getting to Know Your VisionAire Oxygen Concentrator
First, become familiar with the important parts of
your VisionAire Oxygen Concentrator.
A. On/Off (I/0) Power Switch: Starts and stops the
operation of the unit.
B. Circuit Breaker Reset Button: Resets the unit
after electrical overload shutdown
C. Hour Meter: Records the unit's total hours of
operation.
D. Flowmeter/Adjustment Knob: Controls and
indicates the oxygen flow rate in liters per minute
(lpm).
E. Oxygen Outlet: Provides connection for a
humidifier (if required) or cannula.
F. Top and Side Handles: Enables convenience in
carrying the unit.
G. Warning and Alarms Label
H. Specification Label: Displays electrical specifi-
cations and serial number.
I. Power Cord: Allows connection of unit into
electrical outlet.
J. Casters: Four casters enable unit to be easily
moved, as needed.
K. Humidifier Bottle Recess: Area to place the
optional humidifier bottle.
L. Humidifier Bottle (optional)
M. Humidifier Bottle Oxygen Outlet: Connection
for oxygen tubing/cannula.
N. Humidifier Bottle Oxygen Outlet
O. Humidifier Bottle Tubing
P. Humidifier Bottle Fitting
Q. Oxygen Tubing / Cannula
6 - US PN MN238-C4 E | User Manual
WARNING: DO NOT USE EXTENSION
CORDS WITH THIS UNIT OR CONNECT
TOO MANY PLUGS INTO THE SAME
ELECTRICAL OUTLET. THE USE OF EX-
TENSION CORDS COULD ADVERSELY
AFFECT THE PERFORMANCE OF THE
DEVICE. TOO MANY PLUGS INTO ONE
OUTLET CAN RESULT IN AN OVER-
LOAD TO THE ELECTRICAL PANEL
CAUSING THE BREAKER/FUSE TO
ACTIVATE OR FIRE IF THE BREAKER
OR FUSE FAILS TO OPERATE.