needs to get 20 hours to fully
charge the battery.
•
It can extend the life of the
battery. When it is fully charged,
the next charge will get back to
standard charging.
6.2
EXAMINE THE
CHARGER
If the battery pack does not charge
correctly:
1. Examine the current of the
power outlet with different
machines. Make sure that the
outlet works.
2. Examine that the charger
contacts are not short-circuited.
3. If the charger is not under usual
room temperature, move the
charger and battery pack to a
location where the temperature
is between 6° C to 40° C (42.8°
F to 104° F) .
WARNING
If you attempt to charge the
battery pack in a warm or hot
environment, and the charger LED
light is red, remove the battery
pack and let the battery cool for
approximately 30 minutes.
English
6.3
MOUNT THE
CHARGER
1. Get the location of the wall to
attach the charger.
2. Use 2 wood screws to attach the
charger on the wood studs.
3. For charger 2901402/ CAB813:
Drill two holes 114.3mm on
center ensuring they are level.
4. Use wall anchors and screws to
attach the charger to the drywall.
2901402/ CAB813
If you do not use the battery
pack and charger for a long time,
please remove the battery from
the charger and pull out the AC
power plug.
9
NOTE
EN