Cleaning And Maintenance - universalblue UCRA9100-20 Manual De Instrucciones

• Turn the knob to "Power II" for 900W
• Turn the knob to "Power III" for 1500W
If your appliance has 11 heating elements:
• Turn the knob to "Power I" for 800W
• Turn the knob to "Power II" for 1200W
• Turn the knob to "Power III" for 2000W
If your appliance has 13 heating elements:
• Turn the knob to "Power I" for 1000W
• Turn the knob to "Power II" for 1500W
• Turn the knob to "Power III" for 2500W
If the appliance is running, do not cover it, as there is a risk of fire.
Once you have finished using your radiator, turn the knob to the
'OFF' position and the thermostat to the 'Min. Temperature' position.
Unplug the appliance from the mains.

5. CLEANING AND MAINTENANCE

After use and before cleaning always unplug the appliance and wait
until the item is cool.
The appliance should be cleaned regularly to stop dirt and dust
building up which will affect its performance.
Wipe exterior surface of the appliance with a moistened cloth. Not
rinse with water directly. Do not clean the painted-parts with emery-
flour or solvents and use only a moistened-cloth.
Use the appliance when the body is completely dry after cleaning
the heater.
To store the appliance,put the appliance back into its original
packaging and store it in a clean dry place. To keep it in the original
package, please remove the wheels before.
25