Description; Purpose; Overview; Packing List - GreenWorks 2600802 Manual Del Operador

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to remove and clear away snow from
pavements, gardens, driveways and other ground-level
surfaces.
1.2

OVERVIEW

1
2
Auxiliary handle
1
Lock knob
2
Scraper
3
Impeller
4
Lock-out button
5
Trigger switch
6
Cord retainer
7
1.3

PACKING LIST

1 Snow shovel bare tool
2 Auxiliary handle
assembly
2 GENERAL POWER TOOL

SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool.
5
6
7
3
4
3 Operator manual
WARNING
English
2.1 SAFETY WARNINGS
• Walk. Do not run.
• Dress Properly – Do not wear loose clothing or jewelry.
They can be caught in moving parts.
• Keep Children Away – All visitors should be kept a safe
distance from work area.
• Replacement Parts When servicing use only identical
replacement parts. Replace or repair damaged cords.
• If the power tool starts to vibrate abnormally, stop the
power tool immediately and attempt to determine the
cause. Vibration is generally an indication of danger.
• Do not use on graveled surface unless the power tool is
adjusted for such a surface in accordance with the
operator's manual.
• Wear rubber boots when operating the power tool. Do not
operate the equipment when barefoot or wearing open
sandals. Always wear substantial footwear.
• Operation of the power tool in the hand-held position is
unsafe, except in accordance with the special instructions
for such use provided in the operator's manual.
• Keep guards in place and in working order.
• Don't Force Power Tool – It will perform better and safer
at the rate for which it was designed.
• Don't Overreach – Keep proper footing and balance at all
times.
• If the power tool strikes a foreign object, follow these
steps:
1. Stop machine. Release the switch.
2. Unplug power cord.
3. Repair any damage before restarting and operating
the power tool.
• Store Idle Power Tool Indoors – When not in use, power
tools should be stored indoors in dry, locked-up place out
of reach of children.
• Do not operate the equipment without wearing adequate
winter garments. Wear footwear, which will improve
footing on slippery surfaces.
• Never direct the discharge toward people or areas where
property damage can occur.
• When cleaning, repairing, or inspecting, make certain the
collector/impeller and all moving parts have stopped.
• Maintain Power Tools With Care – Follow instructions
for lubricating and changing accessories.
• Allow the power tool to run for a few minutes after
clearing snow in order to prevent moving parts from
freezing.
• To prevent electric shock use only with an extension cord
suitable for outdoor use.
• Only use identical replacement parts and accessories for
this power tool. The use of nonidentical parts or
accessories could lead to serious injury to the user or
damage the power tool, and will void the warranty.
• Do not pick up the power tool while it is running. The
power tool is designed to travel along the ground.
4