Symbols On The Product; Risk Levels; Installation - GreenWorks 2600802 Manual Del Operador

It is possible to tie the extension cord and power cord in a
knot to prevent them from becoming disconnected during use.
Make the knot as shown in the figure, then connect the plug
end of the power cord into the receptacle end of the extension
cord. This method can also be used to tie two extension cords
together.
Ampere rating (on the plate)
0 - 2.1 -
2.0 3.4
Cord
Wire size (A.W.G)
length
25' 16 16
50' 16 16
100' 16 16
Used on 12 gauge - 20 amp circuit
AWG = American Wire Gauge
Keep the extension cord clear of the working area. Position
the cord so that it will not get caught on lumber, tools, or
other obstructions while you are working with a power tool.
Failure to do so can result in serious personal injury.
Check extension cords before each use. If damaged replace
immediately. Never use the product with a damaged cord
since touching the damaged area could cause electrical shock
resulting in serious injury.
4

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol Explanation
Alternating current
Precautions that involve your safety.
Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.
Thrown objects can ricochet and re-
sult in personal injury or property
damage. Wear protective clothing and
boots.
3.0 - 5.1 - 7.1 - 12.1 -
3.5 7.0 12.0 16.0
16 16 14 14
16 14 14 12
14 12 12
English
Symbol
5

RISK LEVELS

-
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM- SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
6

INSTALLATION

Do not change or make accessories that are not
recommended by the manufacturer.
Do not connect to power supply until you assemble all the
parts.
7
Explanation
Keep feet away from openings while
the product is running.
Keep hands away from the discharge
area.
Stop the motor and unplug the prod-
uct before leaving the product.
Wear eye and ear protection.
Do not use a damaged power cord.
MEANING
Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.
Indicates a potentially hazard-
ous situation,which, if not
avoided, could result in death
or serious injury.
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
WARNING
WARNING
EN