Cleaning, Maintenance And Transportation Of Your Cooler - EAS ELECTRIC EMR1092DS2 Manual De Instrucciones

SECTION 5
CLEANING, MAINTENANCE AND TRANSPORTATION OF
YOUR COOLER
CLEANING
Cleaning of your product consists of two stages, namely
internal cleaning and external cleaning.
Always follow the warnings below before starting the
cleaning operation.
WARNING!
 Always unplug your cooler before any cleaning operation.
 Always wear protective gloves during cleaning and main-
tenance. This will protect you against injuries.
 Never use domestic cleaning agents and abrasive - scrat-
ching material to clean (flammable, ignitable and abrasive
materials such as surface cleaners, detergents, fuel oil,
thinner, acids, etc.). Otherwise, discolouration may occur
on the plastic parts of the product.
CLEANING AND MAINTENANCE
1. For efficiency of your deep freeze, perform cleaning and
maintenance at least once in a year.
2. Unplug your cooler from mains power before cleaning it.
3. Always wear protective gloves during cleaning and main-
tenance. This will protect you against injuries.
4. Do not use domestic cleaning agents and abrasive - scrat-
ching materials to clean. Never use flowing or pressured
water to wash.
5. Never wash inside or outside of your appliance. This may
give damage to your appliance or cause electric shock.
21