Bombard Commando C3 Instrucciones De Montaje página 17

Activate all valves into inflation position.
Fit the hose to the foot-pump.
To inflate your boat properly, the bottom side of
the foot-pump must rest on a flat ground
Pump evenly to inflate rapidly.
WARNING
You can us the electrical air pump ACCESS (ask your Dealer).
TO INFLATE THE BUOYANCY TUBE
• Insert the pump hose end piece (add the correct connecting tip for the semi-recessed valve)
• Inflate (pressure = 240 mb, reefer to PRESSURE section) making sure that each compartment is
equal. When correctly inflated, the internal bulkheads (a) are not visible.
NEVER COMPLETELY
COMPARTMENT TO FULL
PRESSURE IF OTHER
COMPARTMENTS ARE
TOTALLY DEFLATED
Inflation is over: fit the valve caps tight (clockwise).
NOTICE :
.
DO NOT USE A COMPRESSOR OR A BOTTLE OF COMPRESSED AIR
INFLATE A
1
2
A slight air-leak before screwing the valve caps is normal.
ONLY THE VALVE CAPS CAN ENSURE FINAL AIR TIGHTNESS.
INFLATION
50 %
50 %
100 %
100 %
6 / 8
a
50 %
100 %