universalblue USBANO2000-18 Manual De Instrucciones página 24

 By pressing the
remote control twice, the display will show
high temperature wind will blow.
 Pressing the
appliance. After pulling air for 15 seconds, the heater will
stop automatically.
SWING
 When the product is working, press the
control panel or on the remote control once. The display will
show
button twice, the oscillation indicator light goes off and the
product stops.
TIMER
 To set the timer, press the
on the remote control. The timer indicator light comes on and
the LED display will show: 00-01-02 .... 11-12-00:
o "00" means canceling the timer,
o Selecting values between 01 and 12 the timer will be
o Please, use timer button to select hours from 1 to 12
button on the heater control panel or the
button for the third time will stop the
icon and the product will turn to blow. Press the
activated between 1 and 12 hours. After configuring
the device, the LED display will flash for approximately
3 seconds.
.
button on the control panel or
icon and the
button on the
24