Hkoenig HF340 Manual De Instrucciones página 8

Step 10. After the operation is over, turn off the machine first, and then pull the removable bowl out.
OPERATION:
Keep cool function
To avoid melting when the ice cream is not placed well in time, the following design is supported:
After the ice cream is finished and without any other operation, the machine will start up the keep cool
function automatically, which can keep cool for 2 hours. Two hours later, machine will enter standby
state.
Motor self-protection function
When the ice cream becomes harder, the mixing motor might be blocked. Then the motor protection
device makes the mixing motor stop working by detecting its temperature to ensure the life of the
motor.
Controlling the Volume of the Ingredients
To avoid overflow and waste, please make sure that the ingredients do not exceed 60% of capacity
of the removable bowl (Ice cream expands when being formed)
The Differences Among These Three Working Mode
1. Ice cream mode: the default working time is 60 minutes. The detailed operation is instructed as
above.
2. Cooling only mode, the default working time is 30 minutes. The operation is similar with that of ice
cream mode, but there isn't mixing function.
3. Mixing only mode, the default working time is 10 minutes. The operation is similar with that of ice
cream mode, but there isn't freezing function.
Storage of ice cream
Remove finished ice cream into another container using a plastic scoop or a wooden spoon, do not
use a metal scoop avoiding scratch on the inside removable bowl.