Bastilipo ET-ECOFLUID 4 Manual De Instrucciones página 10

Installation on the wall
>300mm
-
1) Drill holes on the wall according to
the instruction inside the box.
Warning: Be sure to keep the safety
distances as shown on the above
drawing.
1) Fit the fasten tube in the holes.
2) Fit the up-hook on the wall with
screws.
3) Hang the unit on the up-hook.
>300mm
-
>300mm
-
>300mm
-
1) Fit the bottom hook between 2 fins
at the bottom of unit.
2) Fasten he bottom hook with screw.
Warning: Before using the heater,
make sure it's mounted tightly on the
wall.
Control panel and screen
3.
2.
5.
1. Screen
2. Power On / Stand by
3. Select mode or program
4. Temperature / Timer +
5. Open-window on/off and wifi
function
6. Temperature / Timer -
6 Button
Power on / stand by
Increasing; Keep pressing for quick
increasing; Forward the hour in 24 hour
program setting.
Decreasing; Keep pressing for quick decreasing;
Backward the hour in 24 hour program setting.
Select mode or program
Setting / OK
Open-window on/off and Wifi function
1.
4.
6.
7.