DeWalt DW895 Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DW895/384483
5/2/02
1:11 PM
Maintenance
Shears should be cleaned, inspected, and lubricated at a D
certified service center every 2-6 months depending on usage.
Inspect carbon motor brushes frequently by unplugging tool,
removing the brush inspection caps, and withdrawing the brush and
spring assembly. Replace the assembly when the brushes are worn
down to the line closest to the spring, or when spring exerts
insufficient pressure to hold brush against commutator. Keep brushes
clean and sliding freely in their guides.
An oiling cap is located at the top front of the tool. Each time before
operating, and every 3 hours during operation, add 20 to 30 drops of
SAE 20W or 30W oil to the tool by depressing the ball valve in the
oiling cap.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
All manuals and user guides at all-guides.com
Page 3
WALT
E
3
Full Warranty
D
WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D
WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D
WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D
WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.

Publicidad

Tabla de contenido
loading

Tabla de contenido