Included Parts; Warnings; Installation Procedure - Toto MARIS LT624G#01 Manual De Instrucciones

Check to make sure you have the parts below*:
Under Counter Lavatory
*Installation to hard countertops such as marble or stone requires Hard Surface Mounting
Set, which is not included and must be purchased separately.
When this symbol appears in the manual, it is alerting you of
potential misoperations that may cause personal injury and/or
WARNING
property damage.
1. Cut the template out along the inside of the cutting line.
2. Place the template on the countertop, making sure there is enough clearance
for the faucet and trim and for the cabinet beneath the countertop.
3. Trace around the template, marking the center line of the faucet and the
mounting screw locations.
4. Cut out the opening along the traced template line.
NOTE: A minimum counter thickness of 1" (25.4mm) is required for the provided
installation hardware.
5. For installation to hard surface countertop, such as marble or stone, follow the
special instructions. Otherwise, proceed to step 6.
For Hard Surface Countertops:
1. Use Hard Surface Mounting set,
purchased separately.
2. Drill the anchor holes at the
marked locations and set the
anchors into the countertop using
a setting tool and hammer.

INCLUDED PARTS

Standard Rim
Mounting Set

WARNINGS

INSTALLATION PROCEDURE

4
or
Medium Rim
Mounting Set
Hard Surface
Metal
Bracket
or
Tall Rim
Mounting Set
Anchor
Sealant
Machine
Screw