Settings For Best Sound; Help With Problems / Faq; Battery Life; Cleaning And Maintenance - Beyerdynamic Blue BYRD ANC Instrucciones De Uso

Help with problems / FAQ

Settings for best sound

To achieve the best possible Bluetooth® sound with
your in-ear headphones, please observe the following
practical tips:
1. Set the volume to minimum on the in-ear headphones
and to maximum on the playback device.
2. Then adjust the volume only on the in-ear headphones,
not on the playback device.
This applies only to playback devices that do not
automatically synchronise the volume. On playback
devices that automatically synchronise the volume
(e.g. iPhone, iPad and various Android smartphones), the
headphone volume is always identical to the volume of
the playback device.
3. Deactivate any audio effects that may be present in
the software of the playback device.
HELP WITH PROBLEMS / FAQ
In-ear headphones will not switch on
Battery is empty or almost
empty.
No audio output .
There is no Bluetooth®
connection.
The in-ear headphones do not appear among the
available Bluetooth® devices on the playback device .
The in-ear headphones are
switched off.
The in-ear headphones are
not in pairing mode.
There is already a
Bluetooth® connection to
another playback device.
Playback volume is too low, although set to maximum on
the in-ear headphones
The audio signal being
played back is too quiet.
The sound is harsh and the bass reproduction too low
Insufficient seal on the
earphones.
The wireless range is too low, or the connection is
disrupted
There is interference with
other devices.
12/14
► Charge the battery.
► Pair in-ear headphones
with the playback
device.
► Switch on the in-ear
headphones.
► Set the in-ear head-
phones to pairing mode.
► Disconnect the
Bluetooth® connection
to the other playback
device and connect the
in-ear headphones to
the desired device.
► Set playback volume on
the playback device to
maximum.
Try out alternative left and
right eartips until sound is
ideal.
► Keep your distance
from WLAN routers and
microwave ovens.
► Do not stand between
playback device and
in-ear headphones.

BATTERY LIFE

• Disconnect the USB connection cable from the charger
and in-ear headphones when battery is fully charged.
• High temperatures, especially with a high charge level,
can cause irreversible damage.
• For battery storage, see Seite 7.
• Switch off the battery-powered product after use.

CLEANING AND MAINTENANCE

• Use a soft cloth moistened with alcohol cleaner to
clean all parts of the in-ear headphones. Make sure
that no liquid enters the housing or the transducer.
• Do not use cleaners containing solvents, as these can
damage the surface.

SPARE PARTS

Spare parts for the in-ear headphones can be found at
www.beyerdynamic.com/service.

DISPOSAL

This symbol on the product, in the user
manual or on the packaging means that
your electrical and electronic devices must
be disposed of separately from household
waste at the end of their life cycle. For
further information, please contact your
local authorities or the dealer where you
purchased the product.
► Always dispose of used batteries or devices with
batteries in accordance with the applicable
regulations. Returning batteries is free of charge.
► Please dispose of discharged batteries only.
► This product's built-in lithium-ion battery cannot be
easily replaced by the user.
EU DECLARATION OF
CONFORMITY
beyerdynamic hereby declares that this radio
transmission device complies with the EU Directive
2014/53/EU.
► The full text of the EU declaration of conformity can be
found on the Internet at: www.beyerdynamic.com/cod

TECHNICAL DATA

Bluetooth® frequency range
Transmitting power
Operating temperature range
Charging temperature range
► You can find more detailed information about the
technical data online at:
www.beyerdynamic.com/blue-byrd-anc
2.400–2.4835 GHz
-10 to +60 °C
0 to +45 °C
Blue BYRD ANC (2nd generation)
10 dBm