Maintenance And Service; Maintenance And Cleaning; Repair Service - stayer DM1600 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Operating Instructions
The choice of stirrer paddle depends on the material to
be stirred. For materials with low viscosity, e. g., dispersion
paint, varnish, adhesions, casting compound, cement grout,
etc., use a stirrer paddle with left-hand spiral.
For materials with high viscosity, e. g., ready-mixed plaster,
concrete, cement, screed, filler, epoxy resin, etc., use a stirrer
paddle with right-hand spiral. While mixing, move the power
tool in an up and down motion. Clean the stirror paddle after
use.

Maintenance and Service

Maintenance and Cleaning

- Before any work on the machine itself, pull the mains
plug.
- For safe and proper working, always keep the machine
and ventilation slots clean.
If the machine should fail despite the care taken in m
nufacturing and testing procedures, repair should be carried
out by an after-sales service centre for Stayer power tools.
WARNING! Important instructions for connecting a new
3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the following
code:
Do not connect the blue or brown wire to the earth terminal
of the plug.
Important: If for any reason the moulded plug is removed
from the cable of this power tool, it must be disposed of safely.

Repair service

Our after-sales service responds to your questions conceming
maintenance and repair ofyour product as well as spare parts.
Exploded views and information on spare parts can also be
found under:
info@grupostayer.com
Our customer consultants answer your questions conceming
best buy, application and adjustment of productsand
accessories.
Transport
The contained lithium-ion batteries are subject to the
Dangerous Goods Legislation requirements. The user can
transport the batteries by road without further requirements.
When being transported by third parties (e.g.: air transport
or forwarding agency), special requirements on packaging
and labelling must be observed. For preparation of the item
being shipped, consulting an expert for hazardous material is
required.
Dispatch batteries only when the housing is undamaged. Tape
ENGLISH
16
or mask off open contacts and pack up the battery in such a
manner that it cannot move around in the packaging. Please
also observe possibly more detailed national regulations.
Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
¡Do not dispose of power tools into household
waste! According the European Guideline
2012/19/UE for Waste Electrical and Electronic
Equipment and its implementation into nationa l
right, power tools that are no longer usable
must be collected separately and disposed of in
an environmentally correct manner.
Battery packs/batteries:
Li-Ion:
Please observe the instructions in section
"Transport". Do not dispose of battery packs/
batteries into household waste, fire or water.
Battery packs/batteries should be collected,
recycled or disposed of in an environmental-
friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries must be
recycled according the guideline 2006/66/CE.
16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

M1100cM1200cM1600Dm l20

Tabla de contenido