BaByliss PRO B870 Serie Instrucciones De Operación página 4

6. Do not pull, twist or wrap the cord around the appliance.
7. Never drop or insert any object into any opening on the appliance.
8. Do not place the appliance on any surface while it is operating.
9. Do not use the appliance with a damaged or broken comb or with teeth missing
from the blades, as injury may result. Before each use, make certain the blades are
aligned properly and oiled.
10. Do not use the appliance outdoors or where aerosol (spray) products are being used
or where oxygen is being administered.
11. Do not crush, or heat above 212° F (100° C) or incinerate the appliance, due to risk
of fire, explosion or burns.
12. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls
to OFF position then remove from outlet.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
1. Before using the clipper for the first time, charge continuously for 3 hours.
Maximum battery capacity will only be reached after 3 charging and
discharging cycles.
2. Make sure the switch on the clipper is in the OFF position. Connect the charging jack
into the receptacle on the bottom of the clipper. Plug the adapter into any electrical
outlet (at the voltage listed on the label affixed to the adapter). The charging indicator
will light up blue to indicate that the charging has begun. Charging is complete after
3 hours.
3. The adapter may become warm while charging. This is normal.
4. Preserving the batteries: In order to maintain the optimum capacity of the
rechargeable batteries, the clipper should be recharged for 3 hours approximately
every 6 months.
5. Make sure the switch is in the OFF position when the clipper is not operating.