BaByliss PRO B870 Serie Instrucciones De Operación página 8

ADJUSTABLE TAPER LEVER
The taper lever is positioned at your thumb. You can hold
the clipper in your hand and adjust the lever at the same
time – while you are clipping.
The taper lever adjusts the closeness of the cut from
a close cut with the taper lever in the up position, to
a longer length cut with the taper lever in the down
position. To increase cutting length, slowly push the lever down. To cut closer, push
the lever up. As different cutting edges are used in each setting, using the taper lever
lengthens the life of the clipper blades.
Too much hair can slow down hair clippers. Keep the clipper on for removing hair. Then
push the taper lever back and forth quickly for several times. If you do this every time,
especially after much hair cutting, the clipper blades should remain free of cut hair. Oil
the blades after the above procedures.
DISPOSAL OF LITHIUM ION BATTERY
This clipper has a lithium ion battery. To protect the environment, these batteries should
be removed and properly disposed of when the unit is no longer operating. To remove
the battery block for disposal or recovery, follow these instructions:
1. Disconnect the clipper from household outlet.
2. Discharge the battery pack completely before removing.
3. Remove the blade and bottom cap.
4. Remove 4 screws and open cover.
5. Remove the screw that fastens the printed circuit board to housing. Lift printed circuit
board out.
6. Unplug lithium ion battery.
7. To protect the environment, do not dispose of your battery with your ordinary
household waste. For more details on recovery of material and waste-treatment
facilities, please contact the waste disposal services in your region.
Close Cut
Longer Cut