Battery And Battery Charger - stayer HDBL20 Manual De Instrucciones

gb
This manual is consistent with the date of manufacture
of your machine, you will find information on the
technical data of the machine acquired manual check for
updates of our machines on the website:
www.grupostayer.com
1_MACHINE-SPECIFIC SAFETY
WARNINGS
Working safely with this machine is possible only
when the operating and safety information are read
completely and the instructions contained therein
are strictly followed. In addition, the general safety
notes in the enclosed booklet must be observed.
Before using for the first time, ask for a practical
demonstration.
Wear protective glasses and hearing protection. For
long hair, wear hair protection. Work only with closely
fitting clothes. Before each use, check the machine and
battery. If damage is detected, do not use the machine.
Have repairs performed only by a qualified technician.
Never open the machine yourself.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as when
transporting and storing, always set the rotational
direction switch to the centre position. Otherwise
danger of injury is given when unintentionally actuating
the On/Off switch.
Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
Convince yourself before using that the battery is
securely seated in the machine.
Do not strain the machine so heavily that it comes to a
standstill.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
Operate the machine only with the auxiliary handle 10.
Hold the power tool only by the insulated gripping
surfaces, when performing an operation where the
cutting tool may run into hidden wiring.
Contact with a "live" wire will make exposed metal parts
of the tool "live" and shock the operator.
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility
company for assistance.
Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage.
Be careful when screwing in long screws; danger of
sliding off.
Set the machine against the screw/nut only when
switched off.
When screwdriving, operate in first gear as well as with
a low speed.
Always switch the machine off and wait until it has come
to a standstill before placing it down.
Never allow children to use the machine.
Stayer is only able to ensure perfect operation of the
machine if the original accessories intended for it are
used.

BATTERY AND BATTERY CHARGER

The enclosed operating instructions for the battery
charger must be read carefully!
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire: Danger of
explosion! Do not place the battery on radiators
or expose to strong sun rays for a longer time;
temperatures over 50 °C cause damage.
Do not open the battery, and protect it from impact.
Store in a dry and frost-free place.
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Do not dispose of the battery in household waste or
discard into fire or water.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and moisture.
Danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Provide for fresh air and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
Use the battery only in conjunction with your STAYER
power tool. This measure alone protects the battery
against dangerous overload.
Use only original STAYER batteries with the voltage
listed on the nameplate of your power tool. When using
other batteries, e. g. imitations, reconditioned batteries
or other brands, there is danger of injury as well as
property damage through exploding batteries.
Do not continue to press the On/Off switch after the
machine has been automatically switched off. The
battery can be damaged.
The battery is equipped with a temperature control
which allows charging only within a temperature range
of between 0 °C and 45 °C. A long battery service life is
achieved in this manner.
Observe the notes for disposal.
Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the
lithium ion battery of your power tool.
The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in
the battery charger before using your power tool for the
first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the charging
- 16 -