VONROC VC507DC Traducción Del Manual Original página 6

EN
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Only use the following batteries VONROC VPOWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. On/Off switch
2. Carrying handle
3. Vacuum port
4. Blowing port
5. Metal locking clamp
6. Nozzles storage
7. Container
8. Top section
9. Hose
10. Aluminium round nozzle
11. Aluminium crevice nozzle
12. HEPA Filter
13. Filter holder
14. Battery
6
CD802AA 15. Battery unlock button
16. Battery LED indicators button
220-240V, 50Hz 0.4A
17. Battery LED indicators
21V 2.5A
18. Charger
19. Charger LED indicators
60 minutes
120 minutes
3. ASSEMBLY
CD801AA, CD803AA
0.36 kg
CD803AA
Lithium-Ion
20V
Inserting the battery into the machine (Fig. B)
4.0 Ah
CD802AA
0.65 kg
1. Insert the battery (14) into the base of the
2. Push the battery further forward until it clicks
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (15).
2. Pull the battery out of the machine like shown
Checking the battery charging status (Fig. C)
• To check the battery charge status, push the
• The battery has 3 lights indicating the charge
• When the lights are not burning it means
Charging the battery with the charger (Fig. C)
1. Take the battery (14) from the machine.
2. Turn the battery (14) to upside down position
3. Push the battery until it is fully pushed into the
4. Plug the charger plug into an electrical outlet
Before any work on the power tool, remove
the battery.
The battery must be charged before first
use.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
machine as shown in Fig. B.
into place.
in Fig. B.
button (16) on battery shortly.
level, the more lights that burn, the more
charge the battery has left.
the battery is empty and must be charged
immediately.
and slide it onto the charger (18) as shown in
Fig. C.
slot.
and wait for a while. The LED indicators on
the charger (19) will lighten up and show the
charger status.
WWW.VONROC.COM