Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Locate all electrical, plumbing, and gas lines. Cutting any of these may cause serious injury.
• If installing into a material other than drywall or a stud, consult a professional for proper installation.
WARNING
• Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing,
and gas lines.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 25 minutes (with assistance of another person)
Tools Required for Assembly (not included): Electric drill with the appropriate drill bit size, Level,
Phillips screwdriver, Measuring tape, Pencil and Circular saw
NOTE: Surface Mount: Use a 3/32 in. drill bit and #10 x 2 in. long pan head wood screws (requires 4 per
cabinet) for direct stud installation. Use a 1/4 in. drill bit and 1/8 in. Molly Bolts sized to the appropriate
wall thickness (requires 4 per cabinet) for drywall installation.
NOTE: Recess Mount: Use a 3/32 in. drill bit and 1-1/4 in. long pan head wood screws (requires 2 per
side) for installation.
INSTALLATION INSTRUCTIONS
1. Surface Mount
Attach side panels (C) to sides of cabinet (A) by
removing backing from adhesive strips on side panels,
placing side panels on sides of cabinet and applying
pressure to side panels .
IS2331
1
C
4
A
C
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
