Axxess AXTO-TY2 Instrucciones De Instalación página 2

From the 16-pin harness with stripped leads to the aftermarket radio, connect as indicated:
• Blue/White wire to the amp turn on wire.
• Gray wire to the right front (+) speaker output.
• Gray/Black wire to the right front (-) speaker output.
• White wire to the left front (+) speaker output.
• White/Black wire to the left front (-) speaker output.
• Green wire to the left rear (+) speaker output.
• Green/Black wire to the left rear (-) speaker output.
• Purple wire to the right rear (+) speaker output.
• Purple/Black wire to the right rear (-) speaker output.
Tape off and disregard the following (6) wires, they will not be used in this application:
Brown, Light Green, Blue/Pink, Green/Purple, Orange/White, Red
From the AXTO-TY2 harness to the aftermarket radio, connect as indicated:
• Black wire to the ground wire.
• Yellow wire to the battery wire.
• Red wire to the accessory wire.
• Orange/White to the illumination wire, if applicable.
2
CONNECTIONS
The following (2) wires are only for multimedia/navigation radios that require these wires.
• Green/Purple wire to the reverse wire.
• Light Green wire to the parking brake wire
• Red and White RCA jacks to the audio AUX-IN jacks from the aftermarket radio.
12-pin pre-wired AXSWC harness & 3.5mm jack
This pre-wired harness and 3.5mm jack are to be used with the AXSWC interface
(sold separately) to retain steering wheel audio controls.
• If the AXSWC is not being used, disregard this harness & 3.5mm jack.
• If it will be used, please refer to the AXSWC instructions for radio connections
and programming.
Note: Disregard the harness that comes with the AXSWC.
16-pin pre-wired AXBT harness
This pre-wired harness is to be used along with the AXBT interface (sold separately) to
retain the personalization menu that is lost when removing the factory radio.
• If the AXBT is not being used, disregard this harness.
• If it will be used, refer to the AXBT manual for app instructions.
Note: Disregard the harness that comes with the AXBT.