Recycling Disposal - Parker Hiross ATT025 Manual De Uso

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

English

Refer to the manufacture date of the machine, written in the

data label.

Maintenance work must be performed by authorized personnel.

All spare parts and their respective codes can be found listed on

section 9.4.

Contact supplier

For any maintenance please note the following warnings:

During the replacement of any fi lter element, ensure the perfect closing

of the fi lter, checking the correct alignment of symbols on the head and

the housing.

DANGER: A misalignment of these, could result in the expulsion of

the housing during pressurization of the system, with the consequence

of projection hazard of bodies against persons of things.

DANGER MACHINE UNDER TENSION

Not perform maintenance while the machine is under tension or under

pressure.

Do not remove any covers of the dryer.

DANGER HAZARDOUS VOLTAGE!

DANGER MACHINE UNDER PRESSURE

Not perform maintenance while the machine is under pressure,

perform the following action:

1) Depressurize the compressed air system;

2) Make sure that the pressure on both gauges = 0 bar

(AIR IN "n°20");

Warning: the dryer is still under pressure in the

"AIR OUTLET SIDE" of the cooler

Depressurize the dryer using a valve- "air out cooler"

(if installed by the user) or use the drain-valve of the

dust-fi lter (27).

Make sure that the pressure on gauge = 0 bar

(AIR OUT "n°32").

ATT025-040

6.5 Dismantling

The refrigerant and the lubricant oil contained in the circuit must be re-

covered in conformity with the current local environmental regulations.

The refrigerant fl uid is recovered before fi nal scrapping of the equipment

((UE) No. 517/2014 art.8).

• %