Speed Settings; Other Functions; Midi Settings - HQ-Power VDPC146 Manual Del Usuario

B) Speed Settings
1) Speed adjustment (max. 5 min) :
- Hold the RECORD button
- Press flash key 5 in PRESET A three times
- Release the RECORD button
The yellow LED indicator next to 5MIN (left)is now lit, indicating that the left scale is currently being used for the
SPEED fader.
2) Speed adjustment (max. 10 min) :
- Hold the RECORD button
- Press flash key 10 in PRESET A three times
- Release the RECORD button
The yellow LED indicator next to 10MIN (right) is now lit, indicating that the left scale is now being used for the
SPEED fader.
C) Other Functions
1. BLIND button
• Hold the BLIND button.
• Press the flash button to any channel to deactivate this channel.
2. HOME button
• Hold the HOME button.
• Press the flash button for any channel to reactivate this channel.
3. TAP SYNC button
• Press this button twice to define the rhythm of the music manually (this only works in STEP mode and not in the
AUDIO mode). The interval between the two taps determines the speed)
4. FULL-ON button
• All channel outputs go to 100% as long as the user holds this button.
5. BLACK OUT button
• The programme continues to run but the connected devices do not receive the signal as long as the yellow
BLACK OUT indication LED is lit.
• Press the BLACK OUT button again to deactivate this function.
D) Midi Settings
1. MIDI-IN mode
• Hold the RECORD button
• Press flash button 1 three times in PRESET A
• Release the RECORD button
• The display now shows CH1, indicating that the device is in the MIDI-IN mode
• Press the desired flash button (1 – 16) to assign this MIDI channel to this DMX channel
• Hold the RECORD button
• Press the REC EXIT button to leave this mode
VDPC146 9 VELLEMAN