MIRKA ARG-B 200 Instrucciones De Montaje página 345

Battery pack Mirka BPA 10820
Type Rechargeable
Li-ion
Battery voltge 10.8 VDC
Capacity 2.0 Ah / 21.6 Wh
Weight 0.18 kg (0.4 lbs)
Intelligent battery (Yes/No*)
*Batteries produced before 08/2021
Noise and vibration information
Measured values are determined according to EN 60745.
Cordless
Sound pressure level (L
pA
Sound power level (L )
WA
Sound measurement uncertainty K
Vibration emission value a
Vibration emission uncertainty K
Specifications subject to change without prior notice. Model range may vary between markets.
*
In order to reflect normal working conditions of the sander the operating conditions did deviate from the standard
method as follows: Grain size of the abrasive was 5 m. Feed force was 10 N.
*
The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation. Values measured in a particular work place may be higher than the declared
values. The actual exposure values and amount of risk or harm experienced by an individual are unique to each situ-
ation and depend upon the surrounding environment, the way the individual operates the machinery, the particular
material being worked, work station design and the user's exposure time and physical condition. Mirka Ltd accepts
no responsibility for the consequences of using declared values instead of actual exposure values for any individual
risk assessment.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en (Europe) or http://www.osha.gov (USA)
Proper use of tool
This tool is designed for grinding all types of materials such as paints, metals, wood, stone, plastics, etc. Do not use this
tool for any other purpose than that specified without consulting the manufacturer or the manufacturer s authorized
supplier. Do not use accessories that have a working speed of less than the maximum rated speed of the tool's free speed.
Any maintenance or repair work requiring the motor housing to be opened may only be carried out by an authorized
service center.
Battery and charger
The battery pack is not fully charged out of the carton. First read the safety instructions and then charge your battery
according to the instructions.
For optimal charging capacity the battery should be charged at an ambient temperature between 18 °C (64 °F) and 24
°C (75 °F). To prevent damage to the battery pack, do not charge the battery pack where the air temperature is below
4 °C (32°F) or above 40 °C (104 °F).
To obtain the longest possible battery life, we suggest the following:
Store and charge your battery in a cool area. Temperatures above or below normal room temperature will shorten
battery life.
Never store the battery in a discharged condition. Recharge it immediately after it has been discharged.
All batteries gradually lose their charge. The higher the temperature, the quicker they lose their charge.
Mirka BPA 10825
Rechargeable
Li-ion
10.8 VDC
2.5 Ah / 27.0 Wh
0.18 kg (0.4 lbs)
Yes
ARG- B 200
) 70 dB(A)
81 dB(A)
3.0 dB(A)
* 11.1 m/s 2
h
* 2
1.5 m/s
Mirka BPA 10840 Mirka BPA 10850
Rechargeable Rechargeable
Li-ion Li-ion
10.8 VDC 10.8 VDC
4.0 Ah / 43.2 Wh 5.0 Ah / 54.0 Wh
0.38 kg (0.8 lbs) 0.38 kg (0.8 lbs)
Yes Yes
Mirka® ARG-B 200 Cordless grinder
en | us-ca
345