Troubleshooting; Technical Data; Disposal; Warranty - NUK JOLIE Instrucciones De Uso

Problem
Pump has little or
no suction
Medical device
Temperature range
- Operation
- Storage
If at some stage the device is no longer fit
for use, the parts can be disposed of in
normal household waste.
In addition to
obligations arising from the contract to
purchase, we as the manufacturers provide

11. Troubleshooting

Reason
The pump rod 6 is not correctly
located in the pump diaphragm
7
Pump diaphragm 7 missing,
fitted incorrectly or damaged
Lip valve 9 is incorrectly
positioned
Lip valve 9 missing, fitted
incorrectly or damaged
Breast milk container 10 is full
and lip valve 9 is touching the
expressed milk
No vacuum is being produced
Pump is being held at an angle Hold the pump as upright as possible.

12. Technical data

13. Disposal

14. Warranty

the seller's warranty
Make sure that the pump rod 6 is fully
inserted in the hole in the pump
diaphragm 7 (see "7. Reassembling the
pump (Figures G to N)" on page 17).
Insert pump diaphragm 7 correctly (see
"7. Reassembling the pump (Figures G to
N)" on page 17). If anything is damaged,
please contact the NUK Service Centre
(see "Contact addresses" on page 87).
Position lip valve 9 correctly
(see "7. Reassembling the pump (Figures
G to N)" on page 17).
Check that the lip valve 9 is correctly
positioned. If anything is damaged, please
contact the NUK Service Centre (see
"Contact addresses" on page 87).
Change the breast milk container 10.
Make sure that the breast shield 2 is
making a complete seal around the
breast.
Make sure that the silicone cushion 1 is
inserted correctly and is slipped over the
edges of the breast shield.
Regulation (EU) 2017/745
+6 °C to +40 °C
0 °C to +40 °C
a warranty of 24 months from purchase of
the device as long as the device is used
properly and the instructions for use are
21
Remedy