Troubleshooting; Technical Data; Disposal - NUK e-Motion Instrucciones De Operación

Problem
Pump does not work
Poor pump suction
Pump suction too
powerful
Medicinal product to 93/42/EEC
NUK Vented Teat
Temperature range
- Operation
- Storage
Power supply:
- Mains operation via adapter
Type KK07-045-0800
- Battery operation
In the European Union, the
symbol of a crossed-through
wheelie bin means that the
product must be disposed of at
a separate waste collection
point. This
product
marked with this symbol. Products labelled
in this way must not be disposed of with

12. Troubleshooting

Reason
There is no power
Lip valve is missing or incorrectly
positioned
Pump is being held at an angle
Low battery power
Suction strength is set too low
Suction strength is set too high

13. Technical Data

14. Disposal

applies to this
and all accessories
For battery operation: check that the batteries
are correctly inserted.
For mains operation: check that the mains plug
or mains adapter is correctly inserted.
Check that the lip valve is correctly positioned.
Hold the pump upright. If the pump is held at an
angle it will switch off automatically.
Check whether there is sufficient battery power.
If a light is illuminated beneath the On/Off but-
ton the batteries are too weak. Insert new bat-
teries.
Turn the suction power regulator towards "+" to
attain the optimum suction strength.
Turn the suction power regulator towards "-".
Class I
Complies with EN 14350
8 °C to +40 °C
8 °C to +40 °C
Input 100 – 240 V~/50 Hz, output 4.5 VDC,
800 mA, hollow plug: polarity inner +, outer –
3 Type AAA batteries, 1.5 V
normal household waste, but should be
taken to a collection point for recycling
electric and electronic equipment.
Batteries must not be disposed of with
household waste. It is every consumer's
legal responsibility to ensure that all
batteries are disposed of at a specially
designated collection point.
25
Remedy