Lionelo Oliver Manual Del Usuario página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
5.
Pull both belts through the second guide of the hip belt (M) and fasten them (fig. 21).
6.
Fasten the car seat belts (fig. 22). Check if the child safety seat is properly fixed.
Make sure the shoulder part goes through the child's collarbone, not its neck. The hip belt
must be as low as possible.
B.
ISOFIX + TOP TETHER + Car seat belts
1.
Take steps described in subpoint A concerning assembly of the child safety seat with
car seat belts.
2.
Pull out TOP TETHER fixing belt and then stretch it more with the adjustment (T).
Fasten the handle in the place recommended in the car manual (fig. 20). Tighten up
TOP TETHER with the adjustment (T). The upper fixing belt is properly tightened when
you can see green indicator on the buckle.
HOW TO MAINTAIN AND CLEAN
You can clean the cover in warm water with soap or soft detergent. Do not expose the cover
to sunlight to dry it. Wash the buckle, child safety seat belts and plastic components with
warm water. Do not use strong detergents. If you do not use the product, please store it in
a dark and dry place, away from sunlight.
The product meets the requirements of the ECE R44.04 standard
The pictures are for reference only. The real design of the products may differ from the
EN
pictures presented.
‑ 14 ‑

Publicidad

Tabla de contenido
loading

Tabla de contenido