Tintometer Lovibond TB 350 Guia De Inicio Rapido página 19

Task
Verification
Connectors
Improper handling of certain reagents can cause damage to your
health. In any case follow the safety labels on the packing, the safety
instructions of the package insert and available SDS. Protective
Warning!
measures specified there have to be followed exactly.
EN TB 350
Do
Verify instrument performance under
the following conditions:
1. After performing a calibration.
2. Per internal quality control
procedures.
3. As required by regional regulatory
authorities.
Carefully follow the instructions for
preparation and use of standards.
Ensure connector plugs are in place
when not in a laboratory environment.
5 Maintenance
Do not
Use expired
standards.
Store instrument
without connector
plugs in place.
Transport or support
instrument via a
connector cable.
EN
19