UFESA CT4019 RINGLET Manual De Instrucciones página 13

The mains connection cable must not be tangled or wrapped around the product during
use.
Do not pull on the connection cord in order to unplug it.
Proceed according to the conservation and cleaning section of this manual for cleaning.
Do not use the product on animals.
Always handle the straightener around the body (B) during use of the same. Unplug the
product immediately from the mains in the event of any breakdown or damage and
contact an authorized Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s O cial Technical support service may carry out repairs or
procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and
void. Only an authorized technical support service center may carry out repairs on this
product.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE
1. Plug in the styler in order to turn it on.
2. Press the power and temperature control button (C) continuously for 2-3 seconds.
3. LED digital screen (D) will show the default temperature (180ºC).
4. Select the suitable temperature for your hair between 150-210ºC 150, 165, 180, 195,
210ºC by pressing power and temperature control button (C).
5. The temperature will increase/decrease by 15 degrees and will flash degree-by-degree
until the option selected is reached.
6. Use lower temperatures for fine, blenched or damaged hair, medium temperatures for
normal, wavy hair, and higher temperatures for thick, coarse or ethnic hair.
7. Turn o the styler by pressing the power and temperature control button (C)
continuously for about 2-3 seconds.
If the straightener is not used for a period of 60 minutes with constant temperature it will
automatically shut o .