Programmed Playback - Tokai TB-210 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Repeat Play/Random Play
CD Disc mode
During playback press the PLAY MODE button once, the display shows "REP". The current track will be played
repeatedly.
When pressing the PLAY MODE button a second time, the display shows "REP ALL". All tracks will be played
repeatedly.
When pressing the PLAY MODE button a third time, the display shows "RAND". All tracks will be played in
random sequence.
When pressing the PLAY MODE button a fourth time, the unit will resume to normal playback.
MP3 Disc or MP3 USB mode
During playback press the PLAY MODE button once, the display shows "REP". The current track will be played
repeatedly.
When pressing the PLAY MODE button a second time, the display shows "REP ALBUM". All tracks in the
current folder will be played repeatedly.
When pressing the PLAY MODE button a third time, the display shows "REP ALL". All tracks will be played
repeatedly.
When pressing the PLAY MODE button a fourth time, the display shows "RAND". All tracks will be played in
random sequence.
When pressing the PLAY MODE button a fifth time, the unit will resume to normal playback.
Note:
For MP3 playback, there is a limitation of 99 folders with a maximum of 999 files the unit could support.
-

Programmed Playback

This unit can be programmed to play any sequence of up to 20 tracks.
1. In stop mode press the PLAY MODE button. "P01" is shown.
2. Press the NEXT or PREVIOUS button to select correct folder (available for MP3 tracks only).
3. Press the NEXT or PREVIOUS button to select the desired track.
4. Press the PLAY MODE button to save the desired track.
5. Repeat steps 2-4 to program up to 20 tracks on a CD (99 tracks in MP3
6. Press the PLAY/PAUSE button to play according to the programmed track.
7. To clear program play press the STOP button twice or change to another mode.
8. During program play you can also do the "Repeat One" or "Repeat All" operation. But during program play,
random play is not supported.
This allows you to connect an external player's sound through your unit.
1. Plug a 3.5mm audio cable (not included) into your external player's line out and the other end into the
AUX IN jack at the rear of the unit.
2. Turn on the unit and slide the FUNCTION SWITCH to CD/AUX/USB position, unit will enter the AUX
function mode once an external device is plugged into the CD/AUX/USB jack. The unit will
automatically enter AUX mode.
3. Start to play your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on your CD player and the external device.
All manuals and user guides at all-guides.com
USE AUX
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido